Engine Components

Tool Steel Retainers for 7228/7230 Conical Valve Springs

7& deg

UltraPro One Way Check Valve

• Body is Anodized Aluminum

Valve Spring Shim Kit - 1.250" OD, .814" ID, .015", .030", .060" Thickness

This shim kit contains .015", .030" and .060" thick Valve Spring Shims with 1.250" outside diameter and .814" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim Kit - 1.480" OD, .765" ID, .015", .030", .060" Thickness

This shim kit contains .015", .030" and .060" thick Valve Spring Shims with 1.480" outside diameter and .765" inside diameter are used to equalize the installed height of valve springs.

Velva Ride Engine Stabilizer

This Velva Ride engine stabilizer is the most cost-effective way to smooth out the ride of your 1980 to 2000 FXR and FLT.

7 Titanium Retainer Set of 16 for 26921 Spring w/ 8mm Valve Stem

Upgrading to these 7& deg

7 Tool Steel Retainer Set of 16, 8mm Valve w/ 26925 Springs

These new Tool Steel Retainers from COMP Cams have a 7& deg

Engine Valve Spring

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.

Hi-Tech 8.800" Long, .080" Wall, 3/8" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech Oil Restricting 6.750" Long, .080" Wall, 5/16" Diameter Pushrod

Hi-Tech Oil Restricting 6.750" Long, .080" Wall, 5/16" Diameter Pushrod - Single

Hi-Tech One-Piece 7.700" Long, .135" Wall, 3/8" Diameter Pushrod Set

Hi-Tech One-Piece 7.700" Long, .135" Wall, 3/8" Diameter Pushrod - Set of 16

Hi-Tech One-Piece 9.100" Long, .135" Wall, 3/8" Diameter Pushrod Set

Hi-Tech One-Piece 9.100" Long, .135" Wall, 3/8" Diameter Pushrod - Set of 16

OD Spring Locator Set of 100 - 1.780" OD, .640" ID, .060" Thick

The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today.

Race Extreme 1.660" OD Triple Spring; 2.050" Installed Height; 1 Spring

Triple Valve Springs from COMP Cams deliver maximum strength, durability and valve train stability.

Replacement Adjuster Screw Set for Ultra Aluminum ARC Rockers

Ultra ARC Aluminum Series Rocker Arm - Cup Adjuster Screws - Set of 16.

UltraPro One Way Check Valve

• Body is Anodized Aluminum

10 Degree, 11/32", Single Groove Lock w/o Lash Cap Recess, +.050" Height

This Steel Super Lock with +.050 install height features a 10& deg

10 Degree, .308"/5/16", Single Groove Lock w/ Lash Cap Recess

This Steel Super Lock featuring a lash cap recess, 10& deg

10 Degree, 3/8", Single Groove Lock w/ Lash Cap Recess

This Steel Super Lock with lash cap recess features a 10& deg

10 Degree Superlock Retainer Set of 100 for 1.500"-1.550" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Degree Superlock Steel Retainer for 1.437"-1.500" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Degree Superlock Steel Retainer Set of 100 for 1.500"-1.550" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Degree Titanium Retainer Set of 12 for 1.437"-1.500" OD Double Springs

Upgrading to these 10& deg

10 Degree Titanium Retainer Set of 4 for 1.437"-1.500" OD Double Springs

Upgrading to COMP Cams titanium valve spring retainers will often allow you to gain speed and power because titanium retainers are lighter and as stong as most steel ones.

10 Degree Titanium Retainer Set of 4 for 26095 Beehive Spring

Upgrading to COMP Cams titanium valve spring retainers will often allow you to gain speed and power because titanium retainers are lighter and as stong as most steel ones.