Engine Components

High Energy 7.794" Long, 5/16" Diameter Pushrod Set

High Energy Pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.

Set of 16 Single Springs w/ 1.254" O.D., 1.254" I.D., 1.700" Installed Height

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application.

High Energy 7.725" and 8.684" Long, 3/8" Diameter Pushrod Set

High Energy Pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.

Hardened Steel Set of 16 - 7 Degree, 11/32", Single Groove Street Locks

Includes 16 Pairs of hardened Steel Street Locks: 1 Groove, 7& deg

Replacement Adjusting Nut Set for Magnum Rockers w/ 3/8" Stud

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

Vacuum Cap Assortment 1/8", 3/16", 1/4", 5/16" and 3/8" ( Set of 20)

Edelbrock part #4804 Vacuum Cap Assortment Set of 20 provide a way to seal vacuum line connections on your intake manifold, carburetor or wherever you need.

Hi-Tech 210 Radius 7.900" Long, .080" Wall, 3/8" Diameter Pushrod Set

Designed for high lift Applications where Pushrod and seat interference are problems at maximum lift, Hi-Tech 210& deg

Engine Valve Spring Kit

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.

1 Metal Viton Valve Seal for .500" Guide Size, 3/8 Valve Stem

3/8 x .500" Metal Body Viton Valve Seal

Adjustable Timing Control

• Adjust the timing 15° from the driver’s seat!
• Easily connects to your MSD Ignition.

Replacement Timing Chain for 3110, 3104, 3125, 3122 and 3130 Hi-Tech Timing Sets

Ideal for all street performance and race applications.

Magnum 7.800" Long, .080" Wall, 5/16" Diameter Pushrod Set

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

10 Superlock Steel Retainer Set of 16 for 1.437"-1.500" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 AN Plug

• Black Anodized

Straight 7.500" Long, .165" Wall, 7/16" Diameter Pushrod Set

Hi-Tech Straight 7.500" Long, .165" Wall, 7/16" Diameter Pushrod - Set of 16

Set of 16 O-Ring Valve Seals for Stock Guide Size, 11/32" Valve Stem

Fits: 11/32" Valve Stems / OE-Size Valve Guides (.400" Outer Diameter).

1.125" Tall Polylock Set for High Energy Rockers w/ 7/16" Stud

High Energyâ„¢ Aluminum Polylocks with 7/16" Stud diameter.

1 O-Ring Valve Seal for Stock Guide Size, 11/32" Valve Stem

< ul>< li> Fits: 11/32" Valve Stems - OE-Size Valve Guides (.400" Outer Diameter)</li>< li> Valves Seals keep unwanted oil from entering the combustion chamber through clearance in the valve guides</li>< li> Use standard o-ring Seal retainer and oil splash shield</li>< li> Requires no machining.

Dual Taper 9.850" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Engine Timing Belt

High Energy 212/212 Hydraulic Flat Cam K-Kit for International Harvester 304-392

K-KIT - Complete Kit Includes: Camshaft, Lifters, Valve Springs, Retainers, Valve Locks, Valve Stem Seals, Timing Chain Set, Assembly Lube (in flat tappet applications), Decals and Instructions.

Hi-Tech 7.000" Long, .080" Wall, 5/16" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

HRT Turbo

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines.

Replacement Timing Chain for 2100 and 2136 Timing Sets

Replacement Timing Chain for 2100 and 2136 Magnum Timing Sets

Straight 9.700" Long, .165" Wall, 7/16" Diameter Pushrod

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.