Engine Components

Performance Exhaust 063-1256 GM Air Injection Gasket

• Rated up to 1100 F
• Handles exhaust pressures up to 3700 psig
• Designed for an exact port match with JBA headers

Performance Intake Gasket Material

• Conforms well to irregular flange surfaces
• Very good crush resistance at high flange pressures
• Bulk sheet easily cut for making custom gaskets

Replacement Thrust Button for 210 and 212 Timing Covers and 5100 Belt Drive

Riding between the front of the timing Gear and the back of the timing cover.

Retard Module Kit, 1,2,3,4,5 Degrees

MSD Retard Module Kits give you a full selec­tion of retard modules to be used with your Tim­ing Controls.

Set of 16 Hardened Lash Caps w/ 5/16" Valve Stem, .230" Head Height

Includes 16 Hardened Lash Caps: 5/16" Stem Size, .230" Head Height, .080" Thickness.

Set of 16 Metal Body Viton Valve Seals for .530" Guide Size, 3/8" Valve Stem

3/8 X .530 Viton Metal Body Seal .574 OD

Set of 16 Umbrella Valve Seals for Stock Guide Size, 11/32" Valve Stem

Fits: 11/32" Valve Stems - OE-Size Valve Guides (.750" Outer Diameter).

Stud Girdle Adjusting Nut for 7/16" Stud

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

Stud Girdle Adjusting Nut for 7/16" Stud w/ Snap Ring

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

Three Stage Retard Control

• Twenty-five degrees start retard
• Three separate retards

Turbocharger Oil Flange Fittings

• These Fittings are Made from 2024 Aluminum w/ Black Anodized Finish & 303 Stainless Steel

UltraPro One Way Check Valve

• Body is Anodized Aluminum

Valve Spring Shim Kit - 1.437" OD, .645" ID .060" Thickness

These .060" thick Valve Spring Shims with 1.437" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim Kit - 1.480" OD, .765" ID .060" Thickness

These .060" thick Valve Spring Shims with 1.480" outside diameter and .765" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim Kit - 1.640" OD, .635-.650" ID, .015", .030", .060" Thickness

This shim kit contains .015", .030" and .060" thick Valve Spring Shims with 1.640" outside diameter and .635"-.650" inside diameter are used to equalize the installed height of valve springs.

Valve Stem Locks 11/32" Diameter

Edelbrock part #9611 Valve Stem Locks are 7 Degree, hardened Steel with a 11/32" stem, standard height, machined and hardened replacement valve locks.

Zinc Plated and Polished Aluminum Vacuum Canister

A vacuum reserve canister captures an extra shot of vacuum from your engine for your power brakes.

10 Degree, 11/32", Single Groove Lock w/ Lash Cap Recess

This Steel Super Lock featuring a lash cap recess, 10& deg

10 Superlock Steel Retainer Set of 16 for 1.437"-1.500" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Superlock Steel Retainer Set of 16 for 1.500"-1.550" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Superlock Steel Retainer Set of 16 for 1.500"-1.550" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Titanium Retainer Set of 16 for 1.437"-1.500" OD Double Springs

Upgrading to these 10& deg

10 Titanium Retainer Set of 16 for 1.500"-1.550" OD Double Springs

Upgrading to these 10& deg

10 Titanium Retainer Set of 16 for 1.500"-1.550" OD Double Springs

Upgrading to these 10& deg

10 Titanium Retainer Set of 16 for 1.500"-1.550" OD Double Springs

Upgrading to these 10& deg