Engine Components

ID Spring Locator Set of 16 - 1.550" OD, .570" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

ROCKERS, CS 1.5 7/16" ULTRA PR

The Ultra Pro Magnumâ„¢ XD Rocker Arms are engineered from durable 8650 Steel that outlasts and outperforms other inferior knock-off and import Rockers.

UltraPro One Way Check Valve

• Body is Anodized Aluminum

10 Degree Steel Retainers for 26120 Beehive Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Degree Superlock Steel Retainer Set of 100 for 1.500"-1.550" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Steel Retainer Set of 16 w/ +.050" Installed Height for 26095 Beehive Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Tool Steel Retainer Set of 16 for All Valves w/ 1.250" O.D. Springs

These new 1.250" spring diameter Tool Steel Retainers from COMP Cams have a 10& deg

7 Degree Steel Retainer Set of 16 for 3/8" Valve w/ 1.437"-1.500" Spring

1.030" Steel Retainer for use with #26120 valve springs and #600 valve locks.

7 Titanium Retainer for 11/32" Valve Stem w/ 26915/26918 Beehive Spring

Upgrading to these 7& deg

Black Powder-Coated Aluminum Vacuum Canister

A vacuum reserve canister captures an extra shot of vacuum from your engine for your power brakes.

Dual Valve Spring with Damper, 1.560 OD, 1.950 IH, .760 Lift, 500 LBS/IN, SR - Set

COMP Cams' new 26953 dual valve springs are a product of innovative design and superior craftsmanship, with a lineage back to NASCAR competition.

Endure-X Solid Roller Lifter w/ .842" Diameter, Right Pushrod Seat, .300" Taller

.300" Tall Roller lifter, cutaway body with oil band, .180" right offset, single lifter

Endure-X Solid Roller Lifter w/ .904" Diameter, Center Pushrod Seat, .300" Tall

.300" Tall Roller lifter, centered Pushrod seat, cutaway body with oil band, single lifter

Endure-X Solid Roller Lifter w/ .904" Diameter, Right Pushrod Seat, .300" Taller

.300" Tall Roller lifter, .210" right offset Pushrod seat, cutaway body with oil band, single lifter

Engine Valve Spring Kit

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.

High Energy 7.266" Long, 5/16" Diameter Pushrod Set

High Energy pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.

High Energy 8.152" Long, 5/16" Diameter Pushrod Set

High Energy Pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.

Hi-Tech Polylock Set for 3/8" Stud Ultra Pro Magnum Rockers

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

Low-Mount LS Accessory Drive Bracket - Driver's Side P/S & Alt Bracket

• Fits Middle and Long Accessory Spacing
• Installation Kit 21-4 Required w/ Long Spacing
• Cost Effective Solution

Low-Mount LS Accessory Drive Bracket - Passenger's Side A/C Bracket

• Small Compact Accessory Brackets & Complete Kits
• Cost Effective Solution
• Also works on LSA supercharged engines

LS Accessory Drive Bracket - Installation Kit for Long Alignment

• Aluminum construction
• Will not rust
• Lighter than steel brackets

LS/LT High-Mount Accessory Drive Bracket - Driver's Side P/S & Alt Bracket

• The most cost effective LS bracket solution on the market!
• Utilizes commonly available and affordable GM alternators and power steering pumps
• Ideal for crate engines, take out motors and engine builders!

Set of 12 - 10 Degree, 11/32", Single Groove Locks w/ Lash Cap Recess

These Steel Super Locks featuring a lash cap recess, 10& deg

Set of 16 - 10 Degree 11/32 Single Groove Locks w/ Lash Cap Recess -.050" Height

These Steel Super Locks with .050 install height feature a lash cap recess, 10& deg

Set of 16 - 10 Degree 11/32 Single Groove Locks w/o Lash Cap Recess +.050 Height

These Steel Super Locks with +.050 install height feature a 10& deg