Engine Components

LS Accessory Drive Bracket - Installation Kit for Middle Alignment

• Aluminum construction
• Will not rust
• Lighter than steel brackets

Elite Race Dual Valve Springs: 1.551" OD, 2.000 IH, .800 Lift, 502 LBS/IN, SR - Set

COMP Cams' 26097 dual valve springs are a product of innovative design and superior craftsmanship.

Endure-X Solid Roller Lifter w/ .904" Diameter, Left Pushrod Seat, .300" Taller

.300" Tall Roller lifter, .210" left offset Pushrod seat, cutaway body with oil band, single lifter

Engine Valve Spring Kit

COMP Cams' part number 916-16, valve springs, 1.567" 2-Spring Assembly

Hi-Tech 7.800" Long, .080" Wall, 5/16" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Machined Steel Set of 16 - 7 Degree, 11/32", Single Groove Race Locks

Includes 16 Pairs of Machined Steel Race Locks: 1 Groove, 7& deg

Set of 16 PTFE Valve Seals for .500" Guide Size, 5/16" Valve Stem

< ul>< li> Fits: 5/16" Valve Stems - .500" Guides (.600" Seal Diameter)</li>< li> Valves Seals keep unwanted oil from entering the combustion chamber through clearance in the valve guides</li>< li> Smaller diameter than COMP Umbrella Seals to allow use with double springs</li></ul>

10 AN Plug

• Available for Any Plumbing Situation And Many Custom Applications.

4 AN Plug

• Black Anodized
• Available for Any Plumbing Situation And Many Custom Applications
• 2 per Package

Dual Valve Spring with Damper, 1.442 OD, 1.800 IH, .600 Lift, 391 LBS/IN, FT/HR - Set

COMP Cams' new 26987 dual valve springs are a product of innovative design and superior craftsmanship.

Replacement Valve Stem Oil Seal Kit

Edelbrock part #9758 Valve Seal kit is a replacement valve seal kit for all Edelbrock Performer & Performer RPM heads, except Ford FE.

Ultra-Seal Exhaust Gasket Material

• Conforms to and seals minor surface irregularities
• Bulk sheet allows you to create your own custom gaskets
• For OE replacement, high performance street, drag race and oval track use

Vacuum Cap Assortment

Use to block off open engine vacuum fittings.

Hi-Tech 6.950" Long, .080" Wall, 5/16" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 7.500" Long, .080" Wall, 5/16" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 7.800" Long, .080" Wall, 3/8" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

ID Spring Locator Set of 16 - 1.500" OD, .570" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

10 Degree, 11/32", Single Groove Lock w/ Lash Cap Recess, -.050" Height

This Steel Super Lock with .050 install height features a lash cap recess, 10& deg

6 AN Plug

• Blue Anodized Aluminum

Check Valve

• Unaffected By Most Lubes

Dual Valve Spring 1.560 OD, 1.900 IH, .740 Lift, 550 LBS/IN, Superfinsh

COMP Cams' new 26943 dual valve springs are a product of innovative design and superior craftsmanship.

Hi-Tech Polylock for 3/8" Stud Ultra Pro Magnum Rockers

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

Hi-Tech Polylock for 7/16" Stud Ultra Pro Magnum Rockers

7/16 HI-Tech Poly Lock

Hi-Tech Polylock Set for 7/16" Stud Ultra Pro Magnum Rockers

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

Installation Kit for Low LS Accessory Drive Bracket w/ Long Alignment

• Light weight cast aluminum
• Provides proper belt alignment
• Works with multiple applications