Engine Components

Set of 16 PTFE Valve Seals for .530" Guide Size, 5/16" Valve Stem

< ul>< li> Fits: 5/16" Valve Stems - .530" Guides (.630" Outer Diameter)</li>< li> Valves Seals keep unwanted oil from entering the combustion chamber through clearance in the valve guides</li>< li> Smaller diameter than COMP Umbrella Seals to allow use with double springs</li></ul>

Set of 16 Umbrella Valve Seals for Stock Guide Size, 3/8" Valve Stem

Fits: 3/8" Valve Stems - OE-Size Valve Guides (.900" Outer Diameter).

SET, SINGLE SPRING W/ DAMPER, 1.486 OD, 1.850 IH, .650 LIFT, 410 LBS/IN, HR

Single Valve Spring, 1.404 OD, 1.650 IH, .550 Lift, 300 LBS/IN - Set of 16

COMP Cams new 26903 single valve springs are a product of innovative design and superior craftsmanship.

Stage 1 LST 180/198 Hydraulic Roller Cam

Stage 1 No Springs Required LST Hydraulic Roller Cam

STEEL RETAINERS, 1.437"

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

STEEL RETAINERS, 3/8" 1.437"

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

STEEL RETAINERS, STD 7DEG 2691

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

Timing Chain for 3100, 3136, 3100, 3131, 3138 and 3135 Hi-Tech Timing Sets

Replacement Timing Chain for 3100, 3120, 3131, 3135, 3136, 3138, 7100, 7100-5, 7100-10, 7136, 7138, 7138-5, 7138-10, 8100, 8131, & 8138 Hi-Tech Roller Race, Hi-Tech Keyway Adjustable & Ultimate Adjustable Timing Sets

Timing Retard Module Kit, 5°- 10° Retard Modules

The kit comes with a 5°, 6°, 7°, 8°, 9° and 10° retard module.

Ultra-Seal Exhaust Gasket Material

• Conforms to and seals minor surface irregularities
• Bulk sheet allows you to create your own custom gaskets
• For OE replacement, high performance street, drag race and oval track use

Valve Spring Shim Kit - 1.480" OD, .765" ID .015" Thickness

These .015" thick Valve Spring Shims with 1.480" outside diameter and .765" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim Kit - 1.500" OD, .645" ID, .015", .030", .060" Thickness

This shim kit contains .015", .030" and .060" thick Valve Spring Shims with 1.500" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.

Valve Spring Shim Kit - 1.500" OD, .645" ID .030" Thickness

These .030" thick Valve Spring Shims with 1.500" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs.

7 Degree Tool Steel Retainers for 11/32" Valve Non-LS w/ Beehive Valve Springs

These new Tool Steel Retainers from COMP Cams have a 7& deg

7 Steel Retainer Set of 16 for 3/8" Valve w/ 1.437"-1.500" Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

Engine Valve Spring Kit

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application.

High Energy 10.136" Long, 5/16" Diameter Pushrod Set of 12

High Energy Pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.

High Energy 7.389" Long, 5/16" Diameter Pushrod Set

High Energy Pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.

High Energy 7.500" Long, 5/16" Diameter Pushrod Set

High Energy Pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.

High Energy 7.870" Long, 5/16" Diameter Pushrod Set

High Energy Pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.

High Energy 8.212" Long, 5/16" Diameter Pushrod Set

High Energy Pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.

Hi-Tech 6.350" Long, .080" Wall, 5/16" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 6.800" Long, .080" Wall, 5/16" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech 7.200" Long, .080" Wall, 5/16" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.