Engine Components

10 Degree Tool Steel Retainer Set of 12 for All Valves w/ 1.095" O.D. Springs

These new Tool Steel Retainers from COMP Cams have a 10& deg

1.125" Tall Polylock Set for High Energy Rockers w/ 3/8" Stud

High Energyâ„¢ Aluminum Polylocks with 3/8" Stud diameter.

12 AN Plug

• Blue Anodized Aluminum

1.550" High Lift Dual Valve Spring for Racing Applications

1.520" OD Dual Spring

1 Black Viton Valve Seal for .425" Guide Size, 5/16" Valve Stem

1 Metal Body Viton Valve Seal for .500" Guide Size, 3/8" Valve Stem

3/8 X .500 Viton Metal Body Seal .540 OD

1 Metal Body Viton Valve Seal for .530" Guide Size, 3/8" Valve Stem

3/8 X .530 Viton Metal Body Seal .574 OD

1 Metal Viton Valve Seal for .530" Guide Size, 5/16" Valve Stem

5/16 x .530" Metal Body Viton Valve Seal

2 SPRING ASSEMBLY, 1.536"

Our 954 Dual Valve Springs are perfect for street/strip and racing applications that need high spring pressures to handle aggressive cam profiles.

3 AN Plug

• 2 per Package

8 AN Plug

• Available for Any Plumbing Situation And Many Custom Applications.

8 AN Plug

• Available for Any Plumbing Situation And Many Custom Applications

Accessory Drive Replacement Hardware - Godzilla Alternator Bracket

• Direct replacement for Holley Godzilla accessory drive

BULK, DUAL SPRINGS W/ DAMPER, 1.442 OD, 1.800 IH, .600 LIFT, 391 LBS/IN, FT/HR

Carburetor Stud Kit #8006 Zinc Finish 5/16-18 x 1 1/4in (3 Pieces)

Edelbrock #8006 Carburetor Stud Kit for 3-bolt Flange carbs

Check Valve

• Unaffected By Most Lubes

Dual Taper 10.000" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Hardened Steel 7 Degree, 11/32", Single Groove Street Lock

Includes 1 Pair of hardened Steel Street Locks: 1 Groove, 7& deg

High Energy 8.234" Long, 5/16" Diameter Pushrod

High Energy pushrods from COMP Cams are an affordable, high quality solution when building street rods, RV's and daily drivers.

High Quality Rocker Studs 7/16" (Qty 16)

The Edelbrock high-quality rocker studs #8593 7/16" (Set of sixteen) are used in Edelbrock cylinder heads requiring screw-in studs.

Hi-Tech 11.000" Long, .080" Wall, 3/8" Diameter Pushrod

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech Rocker Stud w/ 7/16" Base Thread and 1/2" Rocker Thread

Hi-Tech Rocker Stud with 7/16" Base Thread and 1/2" Rocker Thread

Intake Valve for #60579, #61579 & #61599 Cylinder Heads

The Edelbrock #9781 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Low-Mount LS Accessory Drive Bracket - Driver's Side P/S & Alt Bracket Polished

• Fits Middle and Long Accessory Spacing
• Installation Kit 21-4 Required w/ Long Spacing
• Cost Effective Solution

Replacement Timing Chain for 2104 and 2109 Timing Sets

Heavy-duty, heat-treated true double Roller timing chain.