Engine Components

Replacement Timing Chain for 3221 Timing Set

Exceed all original equipment timing chain Specifications.

Set of 100 - 10 Degree 11/32 Single Groove Locks w/ Lash Cap Recess -.050" Height

Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running, but this isn't the case.

Set of 8 Metal Body Viton Valve Seals for .530" Guide Size, 11/32" Valve Stem

11/32" Viton Metal Body Seal for use with Triple Spring with a Total OD of .575"

Start and Step Timing Control

• Compatible with 4, 6 or 8-cylinder engines
• Accepts points, amplifiers and mag pickup trigger signals

Vacuum Cap Assortment

Use to block off open engine vacuum fittings.

Evolution Sportster Performance Lifter

Our Hy-Rev Anti Pump-Up lifters for 1991 and newer Sportsters are great for increasing valvetrain stability and helping to increase RPM capability.

Hardened Steel Set of 8 - 7 Degree, 11/32", Single Groove Street Locks

Includes 8 Pairs of hardened Steel Street Locks: 1 Groove, 7& deg

High Energy 212/212 Hydraulic Flat Cam for International Harvester 304-392

High Energy 212/212 Hydraulic Flat Cam for International Harvester 304-392.

Hi-Tech 210 Radius 8.550" Long, .080" Wall, 3/8" Diameter Pushrod

Designed for high lift Applications where Pushrod and seat interference are problems at maximum lift, Hi-Tech 210& deg

Hi-Tech One-Piece 8.380" Long, .135" Wall, 3/8" Diameter Pushrod Set

Hi-Tech One-Piece 8.380" Long, .135" Wall, 3/8" Diameter Pushrod - Set of 16

Hi-Tech One-Piece 9.250" Long, .135" Wall, 3/8" Diameter Pushrod Set

With a massive 37 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech 210& deg

Hy-Rev Lifters for Buell, Twin Cam and Sportster

Hy-Rev?

ID Spring Locator - 1.285" OD, .805" ID, .040" Thickness

ID Spring Locator - 1.285" OD, .805" ID, .040" Thickness - Single

Magnum 6.750" Long, .080" Wall, 5/16" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.750" Long, .080" Wall, 3/8" Diameter Pushrod Set

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Race Endurance 1.565" OD Dual Spring; 2.000" Installed Height; 1 Spring

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.

ROCKERS, CB 1.6 7/16" ULTRA PR

The Ultra Pro Magnumâ„¢ XD Rocker Arms are engineered from durable 8650 Steel that outlasts and outperforms other inferior knock-off and import Rockers.

STEEL RETAINERS, 1.240"

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

STEEL RETAINERS, EB 1.437"

Straight 7.400" Long, .165" Wall, 7/16" Diameter Pushrod

Hi-Tech Straight 7.400" Long, .165" Wall, 7/16" Diameter Pushrod - Single

Straight 7.950" Long, .165" Wall, 7/16" Diameter Pushrod Set

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

VALVE SPRINGS, 1.384" 2 SPRING

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.

10 Degree, 3/8", Single Groove Lock w/ Lash Cap Recess, -.050" Height

This Steel Super Lock with .050 install height features a lash cap recess, 10& deg

10 Degree Steel Retainer Set of 100 for 26120 Beehive Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Degree Steel Retainer Set of 12 for 26095 Beehive Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.