Engine Components

CAM BOLTS, 5/16 X 7/8 SHCS

COMP Cams' part number 6500CB-1, Cam Bolt for 6500 Belt Drive.

CONICAL SPRING, 1.445/1.660 OD, 1.900 IH, .750 LIFT, 400 LBS/IN, SUPERFINISH, HR

Dual Taper 7.850" Long, .165" Wall, 7/16" Diameter Pushrod

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 9.100" Long, .165" Wall, 7/16" Diameter Pushrod

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Hi-Tech One-Piece 9.650" Long, .135" Wall, 3/8" Diameter Pushrod

With a massive 37 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech 210& deg

Machined Steel Set of 100 - 7 Degree, 5mm, Single Groove Race Locks

Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running, but this isn't the case.

Machined Steel Set of 12 - 7 Degree, 8mm, Single Groove Race Locks

Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running, but this isn't the case.

Magnum 7.450" Long, .080" Wall, 5/16" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Set of 8 Metal Body Viton Valve Seals for .530" Guide Size, 5/16" Valve Stem

5/16 X .530 Viton Metal Body Seal 575 OD

Straight 8.150" Long, .165" Wall, 7/16" Diameter Pushrod Set

COMP Cams Straight 7/16", .165" Wall pushrods incorporate Technology that was originally developed for NASCAR and NHRA race engines. pushrods in many of these Applications experience impact loads of up to 7500 lbs., meaning the incorrect one can cause catastrophic failure.

VALVE SPRINGS, 0.953" INNER, R

Single Inner Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application.

10 AN Plug

• Available for Any Plumbing Situation And Many Custom Applications.

10 Degree Superlock Steel Retainer Set 100 for 1.250" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Degree Tool Steel Retainer Set of 12 All Valves w/ 1.500"-1.550" O.D. Springs

These new Tool Steel Retainers from COMP Cams have a 10& deg

10 Tool Steel Retainer for All Valves w/ 1.500"-1.550" O.D. Springs

These new Tool Steel Retainers from COMP Cams have a 10& deg

1 Metal Viton Valve Seal for .530" Guide Size, 11/32" Valve Stem

Single valve Seal with Metal body Viton Seal, .530" Guide, 11/32" valve size.

1 Metal Viton Valve Seal for .530" Guide Size, 3/8 Valve Stem

3/8 x .530" Metal Body Viton Valve Seal

4 AN Plug

• Black Anodized
• Available for Any Plumbing Situation And Many Custom Applications
• 2 per Package

Check Valve

• Unaffected By Most Lubes

Hi-Tech 210 Radius 8.600" Long, .080" Wall, 5/16" Diameter Pushrod

Designed for high lift Applications where Pushrod and seat interference are problems at maximum lift, Hi-Tech 210& deg

Hi-Tech Polylock for 1/2" Stud Ultra Pro Magnum Rockers

Hi-Tech Polylock/Adjusting Nut, 1/2" Stud for Ultra Pro Mangum/Ultra Pro Magnum XD Rockers - Single

LS High-Mount A/C Accessory Drive Bracket - Passenger's Side A/C Bracket

• The most cost effective LS bracket solution on the market!
• Utilizes commonly available and affordable GM A/C compressors
• Accepts GM R4 compressor (Sanden version now available)

Machined Steel Set 100 - 7 Degree, 5/16", Single Groove Race Locks

Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running, but this isn't the case.

Rattler Big Block Chevrolet Billet Timing Pointer for 8 inch Balancers

These high-quality timing pointers are CNC-machined from aluminum billet and are black anodized with a laser-etched logo on the front.

Replacement Timing Chain for 3129 and 3128 Hi-Tech Timing Sets

Ideal for all street performance and race applications.