Engine Components

ID Spring Locator - 1.635" OD, .570" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

ID Spring Locator Set of 100 - 1.510" OD, .570" ID, .060" Thick

The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today.

Intake Valve for #60669 & #60689 Cylinder Heads

The Edelbrock #93661 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valve for #61459, #61559 & #61555 Cylinder Heads

The Edelbrock #97040 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Intake Valves for #77619, #77629, #77639 & #77649 Heads

The Edelbrock #9785 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

Low Profile Vacuum Fitting for Holley Double-Pumper

Edelbrock part #8096 Vacuum Adapter Fitting is a low profile elbow that is designed to provide clearance for Holley and other carbs with a rear fuel bowl that extends over the vacuum port tap in most intake manifolds.

LS/LT High-Mount Accessory Drive Bracket

• The most cost effective LS bracket solution on the market!
• Simple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets
• A/C bracket accepts GM R4 compressor (Sanden version now available)

LS/LT High-Mount Accessory Drive Bracket - Driver's Side P/S & Alt Bracket

• The most cost effective LS bracket solution on the market!
• Utilizes commonly available and affordable GM alternators and power steering pumps
• Ideal for crate engines, take out motors and engine builders!

Machined Steel 7 Degree, 11/32", Single Groove Race Lock

Includes 1 Pair of Machined Steel Race Locks: 1 Groove, 7& deg

Machined Steel 7 Degree, 5/16", Single Groove Race Lock

Includes 1 Pair of Machined Steel Race Locks: 1 Groove, 7& deg

Machined Steel 7 Degree, 5mm, Single Groove Race Lock

Machined Steel 7& deg

Machined Steel Set of 100 - 7 Degree, 3/8", Single Groove Race Locks

Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running, but this isn't the case.

Magnum 8.450" Long, .080" Wall, 3/8" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 8.600" Long, .080" Wall, 5/16" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 9.700" Long, .080" Wall, 5/16" Diameter Pushrod

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum Polylock for 7/16" Rocker Stud

7/16" Magnum Poly Lock-1

MANIFOLD-BRACKET KIT, LT4 DRY-NATURAL

• Genuine Holley Quality Parts

MANIFOLD-BRACKET KIT, LT4 WET-Black

• Cast aluminum water pump manifold used in LT4 kit 20-220BK
• Genuine Holley Quality Parts

MANIFOLD-BRACKET KIT, LT4 WET-NATURAL

• Cast aluminum water pump manifold used in LT4 kit 20-220
• Genuine Holley Quality Parts

Mid LSA/LS Accessory Drive Bracket Kit - Power Steering - Black

• P/S hard line adapters available (197-207)
• Compatible with Holley P/N 20-160 compact SD7 A/C kit
• Compatible with LSA and 2010-15 LS Camaro water pumps

Motor Mount for FXR/FLT Shovel/EVO

Our Motor Mounts are the best you can get for your 1980 and newer FXR/FLT Shovel/EVO bikes.

Performance Exhaust 063-1256 GM Air Injection Gasket

• Rated up to 1100 F
• Handles exhaust pressures up to 3700 psig
• Designed for an exact port match with JBA headers

Polished Motor Mount for FXR/FLT Shovel/EVO

Our Motor Mounts are the best you can get for your 1980 and newer FXR/FLT Shovel/EVO bikes.

Race Extreme 1.640" OD Dual Springs; 2.050" Installed Height; 16 Springs

Elite Race Double Valve Springs from COMP Cams have a .750"+ maximum lift and outside diameter of 1.680".

Race XD 0.090" Left Offset Pushrod Seat Pair for 0.904" Diameter Lifters

Race XD Solid Roller Lifters are the strongest, most durable and versatile lifters available from the leader in valve train technology, COMP Cams.