Engine Components

10 Degree Superlock Steel Retainer Set of 100 for 1.437"-1.500" OD Valve Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

10 Steel Retainer w/ +.050" Installed Height for 26095 Beehive Spring

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs.

1.125" Tall Polylock Set for High Energy Rockers w/ 7/16" Stud

High Energyâ„¢ Aluminum Polylocks with 7/16" Stud diameter.

7mm 7 Degree Tool Steel Retainer for 26056 Springs in our 9709-KIT Spring Kit

COMP Cams Lightweight Tool Steel Retainers provide the best of all valve train benefits: light weight, along with exceptional strength and wear characteristics.

DUAL SPRING W/ DAMPER, 1.560 OD, 1.900 IH, .740 LIFT, 400 LBS/IN, HR

Dual Taper 8.850" Long, .165" Wall, 7/16" Diameter Pushrod Set

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Hi-Tech 10.250" Long, .080" Wall, 3/8" Diameter Pushrod Set

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run.

Hi-Tech One-Piece 9.750" Long, .135" Wall, 3/8" Diameter Pushrod Set of 8

With a massive 37 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech 210& deg

HRT Turbo

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque increases available for turbo and supercharged engines.

Replacement Timing Chain for 2100 and 2136 Timing Sets

Replacement Timing Chain for 2100 and 2136 Magnum Timing Sets

Set of 8 PTFE Valve Seals for .530" Guide Size, 11/32" Valve Stem

COMP Cams offers a complete line of valve stem Seals, from the stock GM "O-Ring" to the positive-stop PTFE Seal.

Hi-Tech Polylock Set for 1/2" Stud Ultra Pro Magnum Rockers

Hi-Tech Polylocks/Adjusting Nuts, 1/2" Stud for Ultra Pro Magnum/Ultra Pro Magnum XD Rockers - Set of 16

10 Titanium Retainer Set of 16 for 1.625" OD 26091 Springs

Upgrading to these 10& deg

Dual Taper 7.850" Long, .165" Wall, 7/16" Diameter Pushrod

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Dual Taper 9.100" Long, .165" Wall, 7/16" Diameter Pushrod

Dual Taper 7/16", .165" Wall pushrods from COMP Cams are designed with the middle of the Pushrod being larger in diameter than the two ends.

Hi-Tech One-Piece 9.650" Long, .135" Wall, 3/8" Diameter Pushrod

With a massive 37 percent increase in stiffness over standard .080" wall Pushrods, Hi-Tech 210& deg

Race Endurance 1.565" OD Dual Springs; 2.000" Installed Height; 16 Springs

Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application.

Set of 100 - 10 Degree, .308"/5/16", Single Groove Locks w/ Lash Cap Recess

Ideal for use in race applications, our wider 10 degree angle locks better distribute increasing spring loads over the retainer more than typicaly 7 degree locks.

Set of 12 Metal Body Viton Valve Seals for .530" Guide Size, 5/16" Valve Stem

5/16 X .530 Viton Metal Body Seal 575 OD

10 Tool Steel Retainer for All Valves w/ 1.500"-1.550" O.D. Springs

These new Tool Steel Retainers from COMP Cams have a 10& deg

1 Metal Viton Valve Seal for .530" Guide Size, 11/32" Valve Stem

Single valve Seal with Metal body Viton Seal, .530" Guide, 11/32" valve size.

1 Metal Viton Valve Seal for .530" Guide Size, 3/8 Valve Stem

3/8 x .530" Metal Body Viton Valve Seal

Hi-Tech Polylock for 1/2" Stud Ultra Pro Magnum Rockers

Hi-Tech Polylock/Adjusting Nut, 1/2" Stud for Ultra Pro Mangum/Ultra Pro Magnum XD Rockers - Single

Machined Steel Set 100 - 7 Degree, 5/16", Single Groove Race Locks

Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running, but this isn't the case.

Replacement Timing Chain for 2120, 2131, 2138 and 2135 Timing Sets

Replacement Timing Chain for 2120, 2131, 2135 and 2138 Magnum Timing Sets