Engine Components

Idler Bearing for Hi-Tech Belt Drive Systems

Replacement Idler Bearing for Hi-Techâ„¢ Belt Drive Systems.

Idler Pulley

• Genuine Holley Quality Parts

ID Spring Locator - 1.100" OD, .470" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

ID Spring Locator - 1.300" OD, .570" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

ID Spring Locator - 1.540" OD, .640" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

ID Spring Locator - 1.550" OD, .570" ID, .060" Thickness

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines.

Intake Valves for #60379 Cylinder Heads

The Edelbrock #9768 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow.

LOWER SEAL,FOR 6502/6506 BELT

Lower Seal for #6502 and #6506 Hi-Tech Belt Drive

Lower Structure Support for Gen III Hemi Engines and Transmissions

• Reduces vibration and noise
• Rigid cast aluminum design with a natural as-cast aluminum finish
• Bolts on over existing oil pan with included fasteners

Low-Mount LS Accessory Drive Bracket - Driver's Side P/S & Alt Bracket Black

• Fits Middle and Long Accessory Spacing
• Installation Kit 21-4 Required w/ Long Spacing
• Cost Effective Solution

LS Accessory Drive Bracket - Installation Kit for Middle Alignment

• Aluminum construction
• Will not rust
• Lighter than steel brackets

LS/LT High-Mount Accessory Drive Bracket - A/C, P/S & Alt Brackets

• The most cost effective LS bracket solution on the market!
• A/C bracket accepts GM R4 compressor (Sanden version now available)
• Ideal for crate engines, take out motors and engine builders!

Magnum 7.150" Long, .080" Wall, 5/16" Diameter Pushrod Set

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum 7.400" Long, .080" Wall, 5/16" Diameter Pushrod Set

Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs.

Magnum Polylock for 3/8" Rocker Stud

3/8" Magnum Poly Lock

Magnum Rocker Stud w/ 7/16" Base Thread and 7/16" Rocker Thread

7/16" Magnum Stud

POLY LOCKS, 7/16 HI TECH

7/16 HI Tech Poly Lock-1

Race Endurance 1.657" OD Conical Springs; 2.000" Installed Height; 16 Springs

As opposed to dual cylindrical spring systems, COMP Cams Dual Conical Valve Springs require no interference fit to dampen spring surge.

Race XD Center Pushrod Seat Set for 0.842"/0.875" Diameter Lifters

Race XD Solid Roller Lifters are the strongest, most durable and versatile lifters available from the leader in valve train technology, COMP Cams.

Replacement Nut and Screw for 1071, 1073, 1074 and 1076 Rockers

Designed for ultimate strength and locking force High Energy and Magnum polylocks are best for moderate lift and spring pressure Applications Hi-Tech Polylocks work well in all high end Race applications.

Replacement Thrust Button for 210 and 212 Timing Covers and 5100 Belt Drive

Riding between the front of the timing Gear and the back of the timing cover.

Replacement Timing Chain for 3201 Timing Set

Exceed all original equipment timing chain Specifications.

Replacement Timing Chain for 3208 Timing Set

Exceed all original equipment timing chain Specifications.

Replacement Timing Chain for 3213 Timing Set

Exceed all original equipment timing chain Specifications.

Replacement Timing Chain for 3226 Timing Set

Exceed all original equipment timing chain Specifications.