Batteries & Charging

HEAVY DUTY ALTERNATOR ADAPTER KIT

• Makes Test Equipment Leads Easier To Attach On Vehicle

High-Current Solid-State Relay 35Ax4, Red

• Multiple mounting options
• Available in Red or Black
• Diagnostic LED’s and status indicators

Hi-Temp Shrink Tubes 18mm x 200' 010834B200

• 3 To 1 Shrink Ratio
• High Temperature Rating
• Stays Flexible

Hi-Temp Shrink Tubes 24mm x 50' 010853

• 3-1 Shrink Ratio
• Meets MIL Spec DTL-23053/5C
• Flame Retardant

Hose/Wire Wrap

• Easy Installation And Removal
• Lightweight
• Self-Wrapping

Ignition Heat shrink Terminal kit (165pcs). Contains Ring and Spade terminals; Butt connectors; Female and Male disconnects;Closed end connectors for 22-10 AWG wire(Red,Blue,Yellow).3:1 shrinkage ratio;

• 165 Piece Kit
• Polyethylene insulation (PE) with Copper Terminal Material
• Wire sizes from 10 - 22 AWG

Ignition Insulated Terminal kit (175pcs). Contains Ring and Spade terminals; Butt connectors; Female and Male disconnects for 22-10 AWG wire(Red,Blue,Yellow)

• PVC Insulated Terminals
• Temperature Rated -10° C to 105° C (-14° to 221° F)
• Wires sizes from 10-22 AWG

JUMP STARTER; EMERGENCY BATTERY PACK; 12V; 800A PEAK; 1800 mAh

• Lightweight And Easy To Handle
• Compatible With Gasoline Engines Up To 4.5L
• Compatible With Diesel Engines Up To 3.5L

Master Battery Disconnect Switch 2 Post

• Required on all NHRA modified and Super Stock Classes
• 3/8 inch posts 180 Amps Continuious / 1000 intermittent
• Especially useful during battery charging

MODULAR INTERNAL IR PRINTER

• For Use w/BVA-2100 XTC-150 And XTC-160
• New Improved Printer Head
• Uses Standard 58mm Thermal Paper

PDU-8 Eight-Channel Power Distribution Unit

• CAN-commanded PDU, no logic programming required for PDU operation
• Small size and lightweight (103x67x33mm/4.05x2.70x1.5", 190g/6.7oz/0.42lbs.)
• Fully-sealed, waterproof billet-aluminum enclosure

Pro Mag 44 Amp Generator, CW Rotation, Black, Standard Cap, Band Clamp

The 44 utilizes a proprietary combination of rare earth magnets and windings to produce its incredible energy.

Protect-A-Wire 8 Cylinder Kit Black 010612

• Includes DEI Hi-Temp Shrink Tubes
• Available In 2 And 8 Cylinder Kits
• 8mm I.D.

Protect-A-Wire Spools Black 0.1875" Bulk 010613B

• Constructed From High Temp Resistant Glass Fiber Material
• Withstands 500 Degrees F Continuous 1200 Degrees F Radiant Heat
• Protects Electrical Wiring/Speedometer/Cable/Hoses

Protect-A-Wire Spools Black 8mm x 50' 010611B50

• Constructed From High Temp Resistant Glass Fiber Material
• Protects Electrical Wiring/Speedometer/Cable/Hoses
• Bulk Spool Is Great To Have On Hand For Any Project

Protect-A-Wire Spools Blue 0.1875" Bulk 010630B

• Constructed From High Temp Resistant Glass Fiber Material
• Withstands 500 Degrees F Continuous 1200 Degrees F Radiant Heat
• Protects Electrical Wiring/Speedometer/Cable/Hoses

Protect-A-Wire Spools Silver 8mm Bulk 010601B

• Constructed From High Temp Resistant Glass Fiber Material
• Withstands 500 Degrees F Continuous 1200 Degrees F Radiant Heat
• Protects Electrical Wiring/Speedometer/Cable/Hoses

Replacement Pinion Gear for SBC/BBC Racing/Extreme Racing Starter and Olds/Pontiac Racing Starter

For drag racing and applications where a smaller and lighter weight starter is desired, TCI offers the finest quality racing starters available on the market.

's Battery Clamp Adapter

• Battery Clamp Power Adapter Connects To The Vehicles Battery To Power A Compressor
• SAE Connector On The Power Cord
• Upgrade Or Convert Your Existing Compressor To Battery Clamp Connections

Shunt Current Sensor

• Galvanic isolation of 1000VDC
• CANbus 2.0a interface
• Highly accurate

Single Channel In-Line LED Controller

• Modes include: Breathing Mode, Heartbeat Mode, Primary and Secondary Strobe Modes, Control Dimming Mode

Spark Plug Wire / Boot Shrink Tubes 12mm x 1.5" Gray 010801

• 3-1 Shrink Ratio
• 25 Tubes To A Package
• Available In Gray/Black/Red And Blue

Spark Plug Wire / Boot Shrink Tubes 18mm x 1.5" Red 010820

• 3-1 Shrink Ratio
• 25 Tubes To A Package
• Available In Gray/Black/Red And Blue

SPE-29681 Wire Loom

• 3/8 inch inside diameter by 8 feet long
• Made from black polyethylene
• Pre-split for easy installation

SPE-4245 Ignition Wire Separators

• Chrome Finish
• Includes Allen wrench
• Racing inspired design