Batteries & Charging

GM 4 Pin Alternator Pigtail

• Fits GM alternators with a 4 Pin oval connector
• Weather Pack style seal
• 8 ft. length

Battery Box, Aluminum Nhra

• Fits most battery sizes
• Hard mounts battery to the frame with 3/8" supplied bolts
• Complies with NHRA rules

Battery Charger

CTEK MXS 5.0 ?

Stator - Unmolded - Harley Davidson - 17.8 Amp - 76-80 Big Twin

• Covered by our limited 90 Day warranty

Battery Charger

CTEK MUS 7002

Battery Charger and Power Bank

CTEK CS FREE:12 V: WET, MF, Ca/Ca, AGM, EFB, GEL, LiFePO4

RFI Shield Split Sleeve 1/2" x 36"

• A 17.5 grounding strap included.
• Tape comes in 1/2in width and 3ft length.
• Great for bundling wiring larger than 1 diameter.

3 AN Bulkhead Nut

• Blue Anodized Aluminum

Protect-A-Boot and Wire Kit Black 8 Cylinder 010712

• 25 Hi-Temp Shrink Tubes
• 8 Protect-A-Boots
• Available In 5 Colors

Battery Charger Accy

CTEK Comfort Connect M8

Push Button Starter Switch 60 Amp

• Rated at 60 amps, 12 VDC
• Features silver contacts
• 5/8" hole size

Easy Loom Split Wire Sleeve 5mm x 20' 010650

• Made In The USA
• Tested to 302°F/150°C
• Self-extinguishing

Easy Loom Split Wire Sleeve 0.75" x 10' 010655

• Made In The USA
• Tested to 302°F/150°C
• Self-extinguishing

8A PIR Sensor Switch

• Temperature Sensitive

In-Line LED Amplifier

• Increases the load capability and extends the signal of any universal RGB controller.

SPE-4606 Wire Separators

• Heavy duty durable heat-resistant resin
• Accommodates 8 or 8.8 mm wires
• Universal design

10 AN Bulkhead Nut

• Available for Any Plumbing Situation And Many Custom Applications.

Dual Channel Multifunction Remote

• Designed to control multiple LED accessories

Replacement Hardware for Alternator Bracket

• Works with or without an air conditioning compressor
• Works with or without a power steering pump
• Ideal for use on Godzilla crate engines & engine swaps

Battery Charger

CTEK US 0.8 - 12V

Battery Charger Accy

CTEK Comfort Connect M6

Solder Sleeve Wire Splice Kit

• Shrink Ratio 2:1
• Wire Sizes from 10-26 AWG
• 42 Piece Kit

SPE-4244 Wire Separators

• Intended for 8 millimeter wires
• Quick and easy identification of wires
• Made from high quality materials

Low Voltage Sensor

• Triggers a warning light if your electrical system has 11 volts or less
• Sensor uses either the supplied LED bulb or a stock incandescent bulb

Plug & Pin Kit for PN 30-8300 PDU-8

• Kit specifically designed for 30-8300 PDU-8
• All hardware included to help ease of installation
• Weather resistant connector