Batteries & Charging

PDU-8 Eight-Channel Power Distribution Unit

• CAN-commanded PDU, no logic programming required for PDU operation
• Small size and lightweight (103x67x33mm/4.05x2.70x1.5", 190g/6.7oz/0.42lbs.)
• Fully-sealed, waterproof billet-aluminum enclosure

Pro Mag 44 Amp Generator, CW Rotation, Black, Standard Cap, Band Clamp

The 44 utilizes a proprietary combination of rare earth magnets and windings to produce its incredible energy.

Protect-A-Wire 8 Cylinder Kit Black 010612

• Includes DEI Hi-Temp Shrink Tubes
• Available In 2 And 8 Cylinder Kits
• 8mm I.D.

Protect-A-Wire Spools Black 8mm x 50' 010611B50

• Constructed From High Temp Resistant Glass Fiber Material
• Protects Electrical Wiring/Speedometer/Cable/Hoses
• Bulk Spool Is Great To Have On Hand For Any Project

Replacement Pinion Gear for SBC/BBC Racing/Extreme Racing Starter and Olds/Pontiac Racing Starter

For drag racing and applications where a smaller and lighter weight starter is desired, TCI offers the finest quality racing starters available on the market.

's Battery Clamp Adapter

• Battery Clamp Power Adapter Connects To The Vehicles Battery To Power A Compressor
• SAE Connector On The Power Cord
• Upgrade Or Convert Your Existing Compressor To Battery Clamp Connections

Shunt Current Sensor

• Galvanic isolation of 1000VDC
• CANbus 2.0a interface
• Highly accurate

Spark Plug Wire / Boot Shrink Tubes 18mm x 1.5" Red 010820

• 3-1 Shrink Ratio
• 25 Tubes To A Package
• Available In Gray/Black/Red And Blue

SPE-29681 Wire Loom

• 3/8 inch inside diameter by 8 feet long
• Made from black polyethylene
• Pre-split for easy installation

Split Wiring Loom

• Includes (6) 4˝ length tie straps
• Slit for easy wire insertion and removal
• Provides neat, clean and organized appearance

Stand Alone Solid State Relay- Black

• Activate with power or ground
• Multiple mounting options
• Diagnostic LED’s

STARTING/CHARGING SYSTEM ANALYZER

• Tests 6 And 12 Volt Batteries
• 20 in.-16 Gauge Test Leads
• LCD Backlit Screen

Stator - Unmolded - Harley Davidson - 22 Amp - 91-98 Sportster

• Covered by our limited 90 Day warranty

Terminal Strip

The MSD Terminal Strip can be used for virtually any wiring installation to pro­vide a clean, professional appearance.

Universal Mounting Bracket - For Voltage Regulator

ACCEL Motorcycle universal mounting bracket lets you install electronic regulators on early model bikes and custom frames for improved charging performance.

12 AN Bulkhead Nut

• Available for Any Plumbing Situation And Many Custom Applications

14-Amp Turn Signal Flasher (2-3 Lamps; 2-6 Hazards)

• Operates 2-3 Lamps Or 4-6 Hazards
• For Applications Where Over-Current Protection Is Required
• Turn Signal Flashers Are 12-Volt 2-Terminal Flashers

20 Amp Relay Wiring Kit

• 20-Amp relay
• 30 Amp Relay
• Red Butt Connectors

30-AMP IGNITION POWER RELAY. PROVIDES CONSISTENT FULL BATTERY VOLTAGE

• Easy to follow instructions make installation simple
• Small size… Keep your engine bay looking stock
• Universal design… Works with most battery ignition systems

500A Dual Channel Analog Current Sensor

• Good accuracy for high and low current.
• The inner diameter is 21.55mm.
• Operating Temperature Range of -40 to 257 Fahrenheit.

Battery Box Aluminum Nhra Optima Battery

• Hard mounts battery to the frame with 3/8" supplied bolts
• Heavy duty one-piece welded batter hold down and mounting hardware included.
• Complies with NHRA rules

Battery Box Alum Nhra With 2Ga Cables

• Hard mounts battery to the frame with 3/8" supplied bolts
• Heavy duty one-piece welded batter hold down and mounting hardware included.
• Complies with NHRA rules

Battery Charger Accy

CTEK Comfort Indicator Eyelet

Battery Relocator Kit-1Ga Single Trunk

• 16' red 2 gauge cable , battery to starter
• 20" black 2 gauge cable, battery to ground
• 13" x 7.25" heavy gauge coated steel tray

Battery Terminal Covers Red Black

• 4-6 gauge
• Pair - 1 red, 1 black
• Top Post