Wiring & Electrical

Battery Charger Accy

CTEK Comfort Indicator Clamps

Battery Charger Accy

CTEK Comfort Connect Cig Socket

Battery Charger Accy

CTEK Comfort Indicator Eyelet

Connector Kit, 2-Pin

MSD's Two Pin Connector Kit replaces damaged connectors or aids in custom wiring.

Deutsch Connector - 2-Pin - 12-14 Gauge

• Waterproof
• Quick Connect

Easy Loom Split Wire Sleeve 0.5" x 100' 010653B100

• Add A Clean And Classy Look
• Tested to 302°F/150°C
• Self-extinguishing

Easy Loom Split Wire Sleeve 1.5" x 72" 010657

• Made In The USA
• Tested to 302°F/150°C
• Self-extinguishing

EV Charge Cord Protector

• Includes DEI Quick Fix Silicone Tape to seal ends.
• Fits 3/4 to 1 diameter charger cables and comes in 20ft length.
• Passes UL94, FMVSS302 flammability tests.

Fire Sleeve 0.75" ID x 50' 010473B50

• Fire Tape Not Included
• Use For Bundling And Protecting Hoses
• Electrical Wiring Etc.

Hi-Temp Shrink Tubes 24mm x 48" 010835

• 3-1 Shrink Ratio
• Meets MIL Spec DTL-23053/5C
• Flame Retardant

Hi-Temp Shrink Tubes 6mm x 200' 010838B200

• 3 To 1 Shrink Ratio
• High Temperature Rating
• Stays Flexible

Hi-Temp Shrink Tubes 9mm x 200' 010832B200

• 3 To 1 Shrink Ratio
• High Temperature Rating
• Stays Flexible

Hose/Wire Wrap

• Easy Installation And Removal
• Lightweight
• Self-Wrapping

Ignition Brass Open Barrel Kit Terminal kit (326pcs). Contains Ring and Spade terminals; Female and Male Bullet Connectors; for 22-12 AWG wire;PVC covers for terminals;

• 326 Piece Kit
• Insulation Material: PVC Clear
• Wire sizes from 12 - 22 AWG

Ignition Connector kit (150pcs). Contains #6 spade terminals, Butt connector, #6&#8 ring terminals,Female and Male disconnectors for 22-14 AWG wire

• 150 Piece Kit
• Material for Ring and Spde Terminals: Tin Plated Copper
• Wire sizes from 14 - 22 AWG

Ignition Dual Wall Heat Shrink Tube Kit 106 pcs. Contains, Red and Black sleeves tube sizes from 1/8" up to 1/2" in 3" Lengths. Made of Polyolefin, Waterproof, Shrink Ratio 3:1, Rated up to 600V, and Temp. rated at -49° to 257°F

• 106 Piece Dual Wall Shrink Tube (waterproof)
• Tube Sizes from 1/8" to 1"
• Material: Polyolefin (Red and Black)

In-Line RGB Link

• Increases the load capability and extends the signal of any universal RGB controller.

PDU-8 Eight-Channel Power Distribution Unit

• CAN-commanded PDU, no logic programming required for PDU operation
• Small size and lightweight (103x67x33mm/4.05x2.70x1.5", 190g/6.7oz/0.42lbs.)
• Fully-sealed, waterproof billet-aluminum enclosure

Pro-Flo 4 Plus EFI O2 Sensor Extension Wiring Harness

This Harness is offered as a support item for all Pro-Flo 4+ EFI Systems where a customers wants to run a second O2 Sensor.

Protect-A-Boot and Wire Kit Red 8 Cylinder 010722

• 25 Hi-Temp Shrink Tubes
• 8 Protect-A-Boots
• Available In 5 Colors

Protect-A-Boot and Wire Kit Silver 8 Cylinder 010702

• 25 Hi-Temp Shrink Tubes
• 8 Protect-A-Boots
• Available In 5 Colors

Protect-A-Wire Spools Silver 8mm Bulk 010601B

• Constructed From High Temp Resistant Glass Fiber Material
• Withstands 500 Degrees F Continuous 1200 Degrees F Radiant Heat
• Protects Electrical Wiring/Speedometer/Cable/Hoses

SPE-18483 Wire Separators

• Slider style construction
• Adjusts to any size from 11 to 15 inches
• Triple chrome plated

SPE-29841 Wire Separators

• 3/4 inch inside diameter by 4 feet long
• Made from black polyethylene
• Pre-split for easy installation

SPE-4602 Wire Separators

• Heavy duty durable heat-resistant resin
• Accommodates 8 or 8.8 mm wires
• Universal design