Exterior

Pipe-Mount Swivel Jack with Top Handle (2;000 lbs; 15in. Travel; Packaged)

• Supports Up To 2000 Lbs. Trailer Tongue Weight
• Weld-On Pipe-Mount Accepts A 9/16 In. Pull-Pin
• Pull-Pin Keeps Jack Securely Locked In Place

Pipe-Mount Swivel Trailer Jack with Side Handle (5;000 lbs; 15in. Travel)

• Supports Up To 3000 Lbs. Trailer Tongue Weight
• Weld-On Pipe-Mount Accepts A 5/8 In. Pull-Pin
• Pull-Pin Keeps Jack Securely Locked In Place

Pipe-Mount Swivel Trailer Jack with Top Handle (5;000 lbs; 10in. Travel)

• Supports Up To 3000 Lbs. Trailer Tongue Weight
• Weld-On Pipe-Mount Accepts A 9/16 In. Pull-Pin
• Pull-Pin Keeps Jack Securely Locked In Place

PnP Tour Rack Side Frames Set

• Provides extra stability and alternate mounting positions for pannier bags on the Thule Tour Rack
• Includes two side frames for a full rack upgrade
• Second rail enables mounting of panniers in lower position when mounted at front wheel

Push-to-Test Breakaway Kit with Side-Load Battery

• Compatible w/Trailers w/Up To Three Axles
• Push-To-Test Battery Case Protects Battery From The Elements
• Meets Dot Requirements For Holding / Breakaway Situations

Racing Axle Ratchet Tie-Downs

• 8" long tie-down provides additional security via axle of rear-end
• 2" webbing features a ratcheting buckle with buckle with integral hook and sail hook that fastens into a D-ring
• Sold individually

Racing Axle Straps

Simpson Tie downs are a great solution for keeping you vehicle or other equipment secured during transport.

RackSack®

• Water resistant
• Solid ITW Nexus connectors
• Designed Engineered and Manufactured in the USA

Receiver Tube Adapter (2-1/2in. to 2in. Shank; 4;500 lbs. GTW; 34in. Length)

• Adapts A 2 1/2 In. Receiver Tube Opening To A 2 In. Shank
• Can Be Cut Down From 34 In. To 24 In.
• Protected By A Durable Powder Coat Finish

Repair Patch

• Thule Repair Patch

Replacement 10in. Hand Win. Handle

• Brake Winches
• Replaces Damaged Or Worn Out Winch Handle
• Comfort Grip For Ergonomic Cranking

Replacement 2in. Channel Mount Shank (Fits #45900 or #45907; 14;000 lbs.)

• Replaces The Shank For The Adjustable Channel Mount #45900
• Protected By A Highly Durable Carbide Powder Coat Finish
• Patent# Us8033563

Replacement 7in. Hand Win. Handle

• Comfort Grip For Ergonomic Cranking
• 7 in. Length
• Includes Handle Assembly Only

Replacement Clevis Hook Safety Latch (Fits #81950)

• Replaces The Latch On Safety Latch Clevis Hooks PN[81950/81960]
• Spring-Loaded Safety Latch Helps Ensure Secure Attachment
• Protected By A Durable Yellow Zinc-Plated Finish

Replacement Direct-Weld Square Jack Cap

• Compatible w/Curt Direct Weld Square Jack #28512
• Helps Protect Internal Jack Parts From Dirt Water And Rust
• Incl. Mounting Hardware

Replacement Dual-Ball for Adjustable Channel Mount (Fits 45900; 45926)

• Fits 2 in. and 2-5/16 in. Couplers
• Accepts Up to 14000 lbs. Depending On Ball
• Protected By A Durable Zinc-Plated Finish

Replacement Fairing Hardware for 18123 Roof Rack Cargo Carrier

• Compatible With Curt [18123]
• Replaces Damaged Or Missing Wind Shield Hardware On Roof Carrier
• Includes Hardware And Clips Only [Fairing Not Included]

Replacement Hand Winch Cable Keeper

• 13mm Width
• Includes Bolt And Bracket
• Cable Sold Separately

Replacement Jack Handle Grip

• Incl. Black Handle Knob And Cap Nut

Replacement Jack Handle Knob for Top-Wind Jacks

• Incl. Red Handle Knob And Cap Nut For Top-Wind Jacks

Replacement Jack Snap Ring

• 2 In. Snap Ring Fits Curt Jacks #28100 #28304 #28302 And #28300
• Swivel Features Allows Jack To Fully Swing Out Of The Way

Replacement Round Weight Distribution Spring Bar (8-10K)

• Fits Curt Mv Round Bar WD Hitches PN[17052/17062]
• Constructed From Forged Steel For Optimum Strength
• Protected By A Durable Powder Coat Finish

Replacement Spectrum Brake Controller Knob Assembly

• Spectrum Trailer Brake Controller Replacement Knob

Replacement S-Series 5th Wheel Slider Handle

• Fits All S-Series 5th Wheel Sliders
• Orange Comfort Grip
• Slider Sold Separately

Replacement Steel Underbody Truck Tool Box Door Cable

• Fits Any UWS Steel Underbody Truck Tool Box
• Stainless Steel Construction Supports Up To 750 Lbs.
• 12 in. Length To Open Door Full 90 Degrees