Truck & Outdoor

Load Stops

• Laterally supports everything from lumber and ladders to canoes and crates
• 4 in. [10 cm] Height
• 523 Load Straps sold separately

Marine Trailer Jack with 6in. Wheel (1;000 lbs; 10in. Travel; Packaged)

• Side-Wind Handle Easily Raises Or Lowers Trailer Couple
• Bolt-On Hardware Included For Secure Mounting
• Protected By A Durable Zinc-Plated Finish

One-Key System

• Set Of 2 Locks All Using The Same Key
• Including Grip-Friendly Thule Comfort Key
• Replace The Locks In Your Thule Product In A Few Easy Steps

Pintle Hook (10;000 lbs.; 2-1/2in. or 3in. Lunette Rings)

• Mounts On Any Curt Adjustable Pintle Mount
• Spring-Loaded Locking Arm For Secure Coupling
• Protected By A Durable Powder Coat Finish

Pintle Mount Hardware Kit (60;000 lbs.; Black Oxide)

• Mounts CURT Pintle Hook PN. 48231
• Compatible With All CURT Pintle Mounts
• Required To Reach 60000lbs. GTW

Pipe-Mount Swivel Jack with Top Handle (2;000 lbs; 15in. Travel)

• Supports Up To 2000 Lbs. Trailer Tongue Weight
• Weld-On Pipe-Mount Accepts A 9/16 In. Pull-Pin
• Pull-Pin Keeps Jack Securely Locked In Place

Pipe-Mount Swivel Jack with Top Handle (2;000 lbs; 15in. Travel; Packaged)

• Supports Up To 2000 Lbs. Trailer Tongue Weight
• Weld-On Pipe-Mount Accepts A 9/16 In. Pull-Pin
• Pull-Pin Keeps Jack Securely Locked In Place

Pipe-Mount Swivel Trailer Jack with Side Handle (5;000 lbs; 15in. Travel)

• Supports Up To 3000 Lbs. Trailer Tongue Weight
• Weld-On Pipe-Mount Accepts A 5/8 In. Pull-Pin
• Pull-Pin Keeps Jack Securely Locked In Place

Pipe-Mount Swivel Trailer Jack with Top Handle (5;000 lbs; 10in. Travel)

• Supports Up To 3000 Lbs. Trailer Tongue Weight
• Weld-On Pipe-Mount Accepts A 9/16 In. Pull-Pin
• Pull-Pin Keeps Jack Securely Locked In Place

PnP Tour Rack Side Frames Set

• Provides extra stability and alternate mounting positions for pannier bags on the Thule Tour Rack
• Includes two side frames for a full rack upgrade
• Second rail enables mounting of panniers in lower position when mounted at front wheel

Push-to-Test Breakaway Kit with Side-Load Battery

• Compatible w/Trailers w/Up To Three Axles
• Push-To-Test Battery Case Protects Battery From The Elements
• Meets Dot Requirements For Holding / Breakaway Situations

Racing Axle Ratchet Tie-Downs

• 8" long tie-down provides additional security via axle of rear-end
• 2" webbing features a ratcheting buckle with buckle with integral hook and sail hook that fastens into a D-ring
• Sold individually

Racing Axle Straps

Simpson Tie downs are a great solution for keeping you vehicle or other equipment secured during transport.

RackSack®

• Water resistant
• Solid ITW Nexus connectors
• Designed Engineered and Manufactured in the USA

Repair Patch

• Thule Repair Patch

Replacement 10in. Hand Win. Handle

• Brake Winches
• Replaces Damaged Or Worn Out Winch Handle
• Comfort Grip For Ergonomic Cranking

Replacement 2in. Channel Mount Shank (Fits #45900 or #45907; 14;000 lbs.)

• Replaces The Shank For The Adjustable Channel Mount #45900
• Protected By A Highly Durable Carbide Powder Coat Finish
• Patent# Us8033563

Replacement 7in. Hand Win. Handle

• Comfort Grip For Ergonomic Cranking
• 7 in. Length
• Includes Handle Assembly Only

Replacement Clevis Hook Safety Latch (Fits #81950)

• Replaces The Latch On Safety Latch Clevis Hooks PN[81950/81960]
• Spring-Loaded Safety Latch Helps Ensure Secure Attachment
• Protected By A Durable Yellow Zinc-Plated Finish

Replacement Direct-Weld Square Jack Bearing

• Compatible w/Curt Direct Weld Square Jack #28512

Replacement Direct-Weld Square Jack Pull-Pin

• Drop Leg w/Spring Return Allows For Fast Retraction
• Pull-Pin Keeps Jack Foot Securely In Place
• Protected By A Durable Zinc-Plated Finish

Replacement Dual-Ball for Adjustable Channel Mount (Fits 45900; 45926)

• Fits 2 in. and 2-5/16 in. Couplers
• Accepts Up to 14000 lbs. Depending On Ball
• Protected By A Durable Zinc-Plated Finish

Replacement Fairing Hardware for 18123 Roof Rack Cargo Carrier

• Compatible With Curt [18123]
• Replaces Damaged Or Missing Wind Shield Hardware On Roof Carrier
• Includes Hardware And Clips Only [Fairing Not Included]

Replacement Hand Winch Cable Keeper

• 13mm Width
• Includes Bolt And Bracket
• Cable Sold Separately

Replacement Jack Handle Knob for Top-Wind Jacks

• Incl. Red Handle Knob And Cap Nut For Top-Wind Jacks