Car Care & Tools

Grease Zerk for Wet Bolt Equalizers/Lubricated Axles; 10 Pack

• Includes 10 Grease Zerks
• Easy DIY Installation
• 1-Year Limited Warranty

Hard Case, Black, 169 qt

• Constructed from Rotomolded Polyethylene HDPE for ultimate durability
• 169QT capacity provides ample storage space
• Ideal for safely storing and transporting tools, recovery gear, and camping gear

Hard Case, Gunship Gray, 169 qt

• Constructed from Rotomolded Polyethylene HDPE for ultimate durability
• 169QT capacity provides ample storage space
• Ideal for safely storing and transporting tools, recovery gear, and camping gear

Hard Case, Gunship Gray, 53 qt

• Constructed from Rotomolded Polyethylene HDPE for ultimate durability
• 53QT capacity provides ample storage space
• Ideal for safely storing and transporting tools, recovery gear, and camping gear

Heads-Off Deck Plate TDC Piston Stop Tool

Positively stop piston in order to find Top Dead Center (TDC) Bolt style screws into spark plug hole while plate type bolts across any cylinder bore when heads are off.

Hi-Tech Pushrod Length Checker 10.800" to 11.800" Length

Hi-Tech Checking Pushrod make it easy to obtain correct valve train geometry for safe and accurate results.

Hi-Tech Pushrod Length Checker 11.800" to 12.800" Length

Hi-Tech Checking Pushrod make it easy to obtain correct valve train geometry for safe and accurate results.

Hi-Tech Pushrod Length Checker 7.800" to 8.800" Length

Hi-Tech Checking Pushrod make it easy to obtain correct valve train geometry for safe and accurate results.

Hi-Tech Pushrod Length Checker w/ 5/16" Cup 10.800" to 11.800" Length

Hi-Tech Checking Pushrod make it easy to obtain correct valve train geometry for safe and accurate results.

Hi-Tech Pushrod Length Checker w/ 5/16" Cup 7.800" to 8.800" Length

Hi-Tech Checking Pushrod make it easy to obtain correct valve train geometry for safe and accurate results.

Holley Mat

• Strong PVC construction reinforced with nylon mesh
• Non-slip front and cushioned non-slip backing
• Standard Size 34 inches x 22 inches

Hose End Wrench Set

• Color Coded

LEAD AND CLAMP ASSY; BVA-200S-WITH STRAIN RELIEF

• Starter/Charging System Analyzer Lead And Clamp Assembly

Lifter Bore Grooving Kit w/ .842", .875" and .904" Tools

Developed by one of the top NASCAR engine builders, this innovative tool precisely grooves the lifter bore to ensure the pressure fed oil is directly injected into the contact area between lifter and Camshaft.

Lifter Bore Grooving Tool for .904" Lifter Bores

Developed by one of the top NASCAR engine builders, this innovative tool precisely grooves the lifter bore to ensure the pressure fed oil is directly injected into the contact area between lifter and Camshaft.

Lithium Battery Powered Drum Pump with Meter

• Lithium Battery: 14.8V at 2.9AH
• Flow Rate: 4.2 Gallons per Minute
• Suction Tube: 22.6 inch to ~ 34 inch

Lithium Battery Powered Pail Pump with Meter

• Power: Lithium Battery: 14.8V at 2.9AH
• Flow Rate: 4.5 Gallons per Minute
• Suction Tube: 16.5 inch to 22.6 inch

Magnum Pushrod Length Checker 10.200" to 11.500"

Precise length measurement is necessary for correct valve train geometry in order to obtain the desired results from the Cam and to ensure damage is not done to the rest of the valve train.

Magnum Pushrod Length Checker 8.500" to 9.800"

Precise length measurement is necessary for correct valve train geometry in order to obtain the desired results from the Cam and to ensure damage is not done to the rest of the valve train.

Magnum Pushrod Length Checker 9.700" to 11.000"

Precise length measurement is necessary for correct valve train geometry in order to obtain the desired results from the Cam and to ensure damage is not done to the rest of the valve train.

Magnum Pushrod Length Checking Set 6.125"-11.500"

Part Number 7900 Master Pushrod Checking Kit - Contains: 1 Each: 7901, 7902, 7903, 7904 and 7905.

Manual Siphon Pump for Racing/Utility Jugs

• Power: Piston-Action (Manual)
• Suction Tube: 22 inch
• Discharge Hose: 46.25 inch

Metered Electric Drum Pump Telescopic

• Flow Rate: 7.1 Gallons per Minute
• Suction Tube: 33.5 to 49 inch
• Discharge Hose: 79 inch + 11.5 inch Nozzle

Mini Stripper Crimper - Heli-Core - Super Conductor Wire

• Allows you to crimp 8-8.5mm wire to terminals

MMTL-BEAD Intercooler Pipe Bead Roller Tool

• Sturdy design made from high-quality steel and aluminum components
• Perfect for aluminum up to 16-gauge and titanium up to 18 gauge
• Adds professional quality beads to all types of tubing