Car Care & Tools

Hi-Tech Pushrod Length Checker 5.800" to 6.800" Length

Hi-Tech Checking Pushrod make it easy to obtain correct valve train geometry for safe and accurate results.

Hi-Tech Pushrod Length Checker 6.800" to 7.800" Length

Individual Length Checker Adjustable Range: 6.800" to 7.800

Hose End Wrench

• Discourages Over-Tightening

Hose Expander Kit - Ultra-Pro

• Works w/ Earl's UltraPro, BMRS®, and XRP®

Ignition 6-1/2" Heavy Duty Stripper; Spring loaded handle making stripping a quick single action; Strips 18-8 AWG wire;

• Tension Loaded Grip holds wire in place
• No damaging or fraying of the wires
• Strips 8 - 18 AWG wires

Inductive Pickup Cable for the 8991 Timing Light

• Replacement Inductive Pickup

LEAD AND CLAMP ASSY; BVA-200S-WITH STRAIN RELIEF

• Starter/Charging System Analyzer Lead And Clamp Assembly

Lifter Bore Grooving Tool for .875" Lifter Bores

Developed by one of the top NASCAR engine builders, this innovative tool precisely grooves the lifter bore to ensure the pressure fed oil is directly injected into the contact area between lifter and Camshaft.

Lithium Battery Powered Drum Pump with Meter

• Lithium Battery: 14.8V at 2.9AH
• Flow Rate: 4.2 Gallons per Minute
• Suction Tube: 22.6 inch to ~ 34 inch

Lithium Battery Powered Ethanol/Methanol/Brake Cleaner Drum Pump

• Lithium Battery: 14.8V at 2.9AH
• Flow Rate: 4.2 Gallons per Minute
• Suction Tube: 22.6 inch to ~ 34 inch

Lithium Battery Powered Pail Pump with Meter

• Power: Lithium Battery: 14.8V at 2.9AH
• Flow Rate: 4.5 Gallons per Minute
• Suction Tube: 16.5 inch to 22.6 inch

LS7 WET SUMP CONVERSION DIPSTICK DRILL JIG

• Self-aligning and locating
• Drill chip evacuation port
• One-piece design

Magnetic Block Deck Checker for Dial Indicator

Our magnetic deck checker allows for the easy mounting of a dial indicator to check piston travel.

Manual Pump

• Power: Piston-Action (Manual)
• Suction Tube: 16.7 inch
• Discharge Hose: 26.5 inch

Manual Siphon Pump for Racing/Utility Jugs

• Power: Piston-Action (Manual)
• Suction Tube: 22 inch
• Discharge Hose: 46.25 inch

Metered Electric Drum Pump Telescopic

• Flow Rate: 7.1 Gallons per Minute
• Suction Tube: 33.5 to 49 inch
• Discharge Hose: 79 inch + 11.5 inch Nozzle

Mini Aluminum Adjustable AN Wrench

• Attractive Clamshell Packaging - Ideal for Retail Display

MMHOSE-HCUT-10 Ratcheting Pipe and Hose Cutter, 2.5in

• Ratcheting hose cutter for silicone coolant hoses, fuel and vacuum lines, or catch can hoses
• Carbon-steel blade leaves smooth, straight cuts on pipes and hoses
• Ratcheting mechanism makes cutting even the thickest lines easy

MMTL-HPDK Harmonic Balancer Puller Set

• Steel body and puller arms easily remove pressed-on harmonic balancers
• Versatile design works on any spoke-style balancer with a single center bolt
• Center screw features a 3/4" hex and a 3/8 internal square drive for use with wrenches or ratchets and breaker bars

MMTL-OF-CLAW Oil Filter Wrench, Claw Style

• Fits any 3/8 drive ratchet or breaker bar for superior leverage
• Low profile to remove filters in tight spaces
• Self adjusting to fit oil filters from 2-1/2-in to 3-7/8-in

Non-Marring Scraper

• Overall Length 9.0” x Blade Width 1.5”
• Uses Standard Single Edge Razor Blades
• Retail Packaging

Power Wrench Thin Wall 3/4 & 13/16

Pro Crimp Tool, Ratchet Action

• Interchangeable Jaws
• Includes Spark Plug Wire Crimping/Stripping Jaws

Professional 16" Diameter Machined Aluminum Camshaft Degree Wheel

Reflect-A-Cool 12" x 24" 010909

• Radiant Heat Protection Up To 2000 Degrees F
• Moisture And Solvent Resistant
• Virtually NO Clearance Needed